TLE5010

From 229ahb
Revision as of 06:24, 20 February 2020 by WikiSysop (talk | contribs) (Created page with " '''Axis rotation detection from a single sensor, single magnet''' an example of usage of the magnetic angular sensor on DIY pedals 300px Note: t...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Axis rotation detection from a single sensor, single magnet


an example of usage of the magnetic angular sensor on DIY pedals

TLE5010 mnt.png

Note: the diametrical magnet is located at the centre axis on the head of the pivoting bolt (not immediately obvious from angle of this image)


Solder the wiring connector supplied with the TLE5010 sensor to the Pro Micro (MMJoy2) HID USB board as illustrated:


Wiring Pinouts
Func Wire Colour Pro Micro Pin TLE5010.png
GEN White 10 (MMjoy B6)
SCK Blue 15 (MMjoy B1)
MISO Green 14 (MMjoy B3
NEG Yellow GND
CS Black A2 (MMjoy F5
POS Red VCC


Note: Be certain you have diametrical magnets

They stack like this.

Diametrical magnets.jpg

NOT like this

Magnets.jpg



All the technical information you could ever need regarding the TLE5010 GMR-Based Angular Sensor:

https://4donline.ihs.com/images/VipMasterIC/IC/INFN/INFNS12044/INFNS12044-1.pdf