TLE5010

Axis rotation detection from a single sensor, single magnet

an example of usage of the magnetic angular sensor on DIY pedals

Note: the diametrical magnet is located at the centre axis on the head of the pivoting bolt (not immediately obvious from angle of this image)

Solder the wiring connector supplied with the TLE5010 sensor to the Pro Micro (MMJoy2) HID USB board as illustrated:

Wiring Pinouts
Func	Wire Colour	Pro Micro Pin
GEN	White	10 (MMjoy B6)
SCK	Blue	15 (MMjoy B1)
MISO	Green	14 (MMjoy B3
NEG	Yellow	GND
CS	Black	A2 (MMjoy F5
POS	Red	VCC

Note: Be certain you have diametrical magnets

They stack like this.

NOT like this

All the technical information you could ever need regarding the TLE5010 GMR-Based Angular Sensor:

https://4donline.ihs.com/images/VipMasterIC/IC/INFN/INFNS12044/INFNS12044-1.pdf