MW Perform simulated max GW takeoffs
From 229ahb
Revision as of 08:28, 20 February 2020 by WikiSysop (talk | contribs) (Created page with "File:229AHB_logo.png '''Master Wings requirement:''' TASK 2095 ''- PERFORM SIMULATED MAXIMUM GROSS WEIGHT TAKEOFFS'' ===30. TASK 2095: Perform simulated maximum gr...")
Master Wings requirement: TASK 2095 - PERFORM SIMULATED MAXIMUM GROSS WEIGHT TAKEOFFS
Contents
- 1 30. TASK 2095: Perform simulated maximum gross weight takeoffs
- 1.1 30.1. Objective: The pilot will develop the knowledge and skills necessary to perform maximum gross weight takeoffs as per task 2095 UH-1h ATM 2007
- 1.2 30.2. Competencies expected: Senior Wings certification standards and for this task, the pilot will demonstrate
- 1.2.1 30.2.1. correctly selecting the type of take off requiring the minimum amount of power to safely complete the manoeuvre
- 1.2.2 30.2.2. accurately predicting the torque/power required for the manoeuvre
- 1.2.3 30.2.3. determining the point where the aircraft will enter effective translational lift (ETL) for the type of takeoff being performed
- 1.2.4 30.2.4. establishing an abort point and reconfirm escape plan determined in the reconnaissance
- 1.2.5 30.2.5. use of minimum power necessary for the take off
- 1.2.6 30.2.6. conducting post-task analysis (PTA) after take off
30. TASK 2095: Perform simulated maximum gross weight takeoffs
Task criteria:
- Coastal airfield, apron cold start
- standard atmospheric pressure set to 101.325 mbar – 29.921 inHg / 760 mmHg temperature 38C
- Load 2 x 19HE, 2 front Guns, 2 x M60 side gunners & 68% fuel load = 9509lbs / 4013kg
